AMB 2026
15.09.–19.09.2026, Hall 5, Booth B22
With the Höfler VIPER 500 cylindrical gear grinding machine, Klingelnberg offers a solution that stands out for its flexibility and efficiency. The machine is designed for component diameters up to 500 mm and is ideal for small to medium batch sizes. Thanks to its modular design, the VIPER 500 is available in three different configurations: profile grinding with small grinding wheels for special tasks and multi-wheel technology (K), generating grinding (W), and a combined version (KW). Particularly noteworthy is the possibility of performing both profile grinding and continuous gear grinding on the same machine in the VIPER 500 W / KW configuration – with minimal changeover times.
The VIPER 500 impresses with its exceptional versatility: changeover from generating to profile grinding takes less than five minutes, and changeover to internal grinding takes less than 15 minutes. Highly dynamic axes with an acceleration of 5 m/sec² and a rapid traverse of 20 m/min ensure maximum productivity. The low-maintenance machine concept separates the working area from the drive technology, which increases reliability and minimizes maintenance requirements. In addition, there is no need for a pump station for the grinding oil, which further reduces operating costs.
New: Quick-Change Adapter Solution for Internal Grinding Arms
The smallest representative of the internal grinding arm lineup has recently received an update that improves its ease of operation and setupeven further. The grinding wheel bearing of the new “VGS8” has now been integrated into a quick-change adapter that can easily attach to the housing. This means that grinding wheels are no longer changed in the machine, but rather on a workbench, where small components can be assembled under ideal working conditions. The newly equipped adapter can then be securely mounted in the housing using fixed stops. Two interchangeable adapters reduce changeover times to a minimum.
The fully automatic, CNC-controlled P 40 precision measuring center is the ideal complement to production and sets new standards in quality assurance. The compact device is designed for workpieces with a diameter of up to 400 mm and enables the precise inspection of cylindrical gears, cutting and shaving wheels, worms and worm gears, hobs, bevel gears, and general dimensional, shape, and positional deviations on rotationally symmetrical workpieces. In addition, the P 40 is also suitable for measuring camshafts and rotors.
At AMB 2026, the P 40 will be presented in combination with a robot arm that enables automated loading and unloading of workpieces. This enables a continuous, efficient, and operator-independent measuring process—an important step toward fully automated production. Thanks to integrated temperature compensation, the measuring center delivers reliable results even at ambient temperatures of +15 °C to +35 °C – directly in production. Fast and precise measurement data acquisition is supported by a high-precision workpiece rotary table. A wide range of measuring tasks, such as coordinate, shape, gear, and roughness measurements, can be performed in a single setup. The versatile, scanning 3D touch probe system with digital measurement value acquisition in all coordinate directions ensures maximum accuracy and low tolerances. The simple, graphical programming environment and intuitive software operating concept enable convenient handling. The rapid availability of measurement results results in significant time savings in the production process.
Data-driven quality management (DDQM) is the key to the future of production for us. The focus is on the consistent use and intelligent networking of all relevant production data. The aim is to use this data specifically to control, increase, and optimize the final quality of workpieces.
A holistic DDQM enables potential problems to be identified at an early stage and response times within production to be drastically reduced – even before the workpieces leave the production hall. With DDQM, we develop comprehensive software components that provide valuable information about cause-and-effect relationships, thus enabling preemptive quality control.
Smart Tracing is a web-based software that comprehensively analyzes the behavior of all types of CNC machines—from machining centers to complex production facilities—using the most common control systems. By uploading, managing, and evaluating servo traces in conjunction with relevant process and performance data, control, regulation, and contour deviations as well as other performance indicators are made visible. This makes it possible to identify and evaluate cause-and-effect relationships for both individual machines and entire production lines in a targeted manner.
With Smart Tracing, high-frequency recorded signals can not only be analyzed, but also archived, compared, and checked for tolerance. This allows faults, vibrations, changes in stiffness, and process deviations in the manufacturing process to be identified at an early stage. The software thus supports predictive maintenance and contributes significantly to the optimization of production processes —and not just for Klingelnberg machines.
Smart Factory is revolutionizing how products are designed, built, and delivered. Through the integration of IoT, AI, and real-time data analytics, factories are becoming more intelligent, efficient, and adaptive than ever before. From predictive maintenance that minimizes downtime to digital workflows that streamline operations, Smart Factory unlocks higher productivity, reduced costs, and improved quality. The future of the industry isn’t just automated—it’s connected, data-driven, and optimized for peak performance. Our team of experts will be presenting this new solution at the AMB trade fair in Stuttgart.
The performance of a machine stands and falls with the quality of the tools and clamping devices used. This is why Klingelnberg is also setting new standards in this area – with maximum precision, reliability and innovative technology. At AMB, visitors can expect not only a comprehensive range of new products from the fields of machines, quality and software solutions, but also pioneering developments and innovations in the field of tooling systems.
The KLINGELNBERG Group will be exhibiting at AMB in Stuttgart, the leading international trade fair for metalworking, from 15 to 19 September 2026. Since 1982, AMB has been the biennial meeting place for the most important players in the metalworking industry. The focus is on products, technologies, innovations, services, and concepts that drive and advance the industry. Klingelnberg is looking forward to presenting its latest solutions and innovations at AMB 2026 and intensifying personal exchanges with customers, partners, and industry experts.
We would be happy to send you a free admission voucher. Please fill out the below contact form and check your spam folder.