C 60

OERLIKON Bevel Gear Cutting Machine


Highly efficient, environmentally friendly dry-cutting

The C 60 bevel gear cutting machine covers the upper application range of the C series. It is used for cutting bevel gearboxes for heavy-duty trucks and tractors, and has the same well-tried design as every C machine. In the C 60, special emphasis was placed on high static and dynamic rigidity. A look at the large, extremely stiff machine components makes this apparent. And the proof is in the gear-cutting performance and quality.


  • 6-axis CNC machine for highly efficient bevel gear cutting
  • Well-tried axis concept for compact design
  • High-performance carbide tools
  • Short retooling times thanks to ergonomic machine design
  • Unrivaled gearing and surface quality
  • Energy efficient (e2)
Range of Application continuous indexing single indexing
Workpiece Data
Workpiece diameter (max.)

Ø 630 mm

Normal module range

3.5 - 10 mm

3.5 – 10 mm

Tooth width (max.)

100 mm

Smallest/largest spiral angle

0°/60°

Smallest/largest number of teeth

6/180

Smallest/largest gear ratio

1:1/1:10

Tool Data
Cutter head diameter

88 - 181 mm

7.5“ – 18“

Cutter Head Spindle (A axis)
Seating diameter: Gleason outer cone, No. 14; 1:24

Ø 58.227 mm

Cutter head spindle speed (max.)

330 rpm

Workpiece Spindle (B axis)
Seating diameter: Oerlikon inner cone No. 80; 1:16

Ø 203.218 mm

Workpiece spindle opening

Ø 190 mm/650 mm long

Workpiece spindle speed (max.)

450 rpm

General Machine Data
Total connected load

100 kVA

Machine dimensions (L x W x H) approx.

6,165 x 3,600 x 3,200 mm

Net weight approx.

35,000 kg

Range of Application
Workpiece Data
Workpiece diameter (max.) Ø 630 mm
Normal module range 3.5 - 10 mm
Tooth width (max.) 100 mm
Smallest/largest spiral angle 0°/60°
Smallest/largest number of teeth 6/180
Smallest/largest gear ratio 1:1/1:10
Tool Data
Cutter head diameter 88 - 181 mm
Cutter Head Spindle (A axis)
Seating diameter: Gleason outer cone, No. 14; 1:24 Ø 58.227 mm
Cutter head spindle speed (max.) 330 rpm
Workpiece Spindle (B axis)
Seating diameter: Oerlikon inner cone No. 80; 1:16 Ø 203.218 mm
Workpiece spindle opening Ø 190 mm/650 mm long
Workpiece spindle speed (max.) 450 rpm
General Machine Data
Total connected load 100 kVA
Machine dimensions (L x W x H) approx. 6,165 x 3,600 x 3,200 mm
Net weight approx. 35,000 kg

The above-mentioned maximum values were determined for industry-typical gear units.
If necessary it has to be examined whether maximum values can be combined.

Subject to changes.

The machine dimensions of the standard version are for orientation only. The final machine dimension / final space requirement depends on the individual configuration of the machine.
C 60 Technical Data Sheet English
(PDF, 568 KB)
1/4
*Compulsory field
Your local sales representative will be found below locations.
KLINGELNBERG AG
Binzmühlestrasse 171
8050 Zürich, Switzerland
Fon: +41 44 278 7979
Fax: +41 44 273 1594
KLINGELNBERG GmbH
Peterstrasse 45
42499 Hückeswagen
Fon: +49 2192 81-0
Fax: +49 2192 81-200
KLINGELNBERG GmbH
Industriestrasse 19
76275 Ettlingen, Germany
Fon: +49 7243 559-0
Fax: +49 7243 599-165
www.klingelnberg.com marketing@klingelnberg.com © 2019  KLINGELNBERG