Klingelnberg Group: R 300

R 300

HÖFLER Cylindrical Gear Roll Testing Machine

Compact, flexible and highly accurate testing technology

The Höfler Roll Testing Machine R 300 is covering the same component spectrum as the Speed Viper series in terms of axis traversing paths. Wheel components can be tested up to an outside diameter of 300 mm. In conjunction with the optional counter support, shafts up to 800 mm long in extreme cases can be analyzed to determine their running performance and noise behavior.

Compact design with minimal footprint of less than 2 m²
Optimal damping thanks to mineral-cast bed
Workpiece spectrum similar to Speed Viper series
One test machine for gear and shaft components
Available roll testing methods: single flank test, structure-borne noise and angular acceleration test, double-flank test
Direct drives in spindles and test slides
Test speeds up to 2,000 rpm
Machine can be used in the GearLab as well as on the shop floor

Range of Application
General Data
Workpiece diameter (max)	Ø 300 mm
Workpiece weight (max.)	50 kg
Workpiece spindle rotation speed (max.)	2,000 rpm
Workpiece spindle torque (S1/S6 – 25%)	56 Nm/97 Nm
Workpiece wavelength (max.)	800 mm
Workpiece face width (max.)	150 mm
Counter support distance between centers over table (max.)	1,090 mm
SFT/SBNT/TAT-Slide-Radial-Force (max.)	80 N
SFT/SBNT/AAT master gear spindle rotation speed (max.)	2,000 rpm
SFT/SBNT/AAT master gear spindle torque (S1/S6 – 25%)	56 Nm/97 Nm
SFT/SBNT/AAT master gear diameter (max.)	Ø 300 mm
SFT/SBNT/AAT master gear face width (max.)	150 mm
SFT/SBNT/AAT slide center distance without tailstock (min. – max.)	-1 – 325 mm
SFT/SBNT/TAT slide center distance with tailstock (min. – max.)	145 – 325 mm
DFT master gear spindle rotation speed (max.)	150 rpm
DFT slide radial force (max.)	50 N
DFT master gear diameter (max.)	Ø 200 mm
DFT master gear face width (max.)	150 mm
DFT slide center distance without tailstock (min. – max.)	-1 – 275 mm
DFT slide center distance with tailstock (min. – max.)	80 – 275 mm
General Machine Data
Total connected load	20 kVA
Compressed air connection	6 bar / 800 l / min
Net weight approx.	4,500 kg
Machine dimensions (L x W x H) approx.	2,400 x 850 x 2,820 mm

Subject to changes.

The machine dimensions of the standard version are for orientation only. The final machine dimension / final space requirement depends on the individual configuration of the machine.

show less

R 300 Brochure English (pdf / 1 MB)

Höfler Cylindrical Gear Roll Testing Machine R 300 - The Gear Noise Finder

By clicking on the image you will leave our website and be redirected to www.youtube.com.

Company *

Salutation

Title

Surname *

Name *

Address *

Zip-Code *

City *

Country *

E-Mail *

Phone *

Fax

Message *

I have read the data privacy policy. *

*Compulsory field

Your local sales representative will be found below locations.

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

Modular Machine Design

Ideal for testing the component spectrum of the Speed Viper series
Same base machine for gear and shaft components
Counter support for shaft testing (optional)
Test slide with fixed installation height or optional manual or automatic height adjustment

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

Fast Changeover

Flexible, easy adjustment of the center distances via HMI input
Automatic height adjustment of test slide (optional)
Easy master gear change via hydraulic clamping mandrel
Interchangeable workpiece base clamping units, choice of hydraulic or mechanical clamping equipment
Counter support with manual basic setting and pneumatic clamping

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

Flexible Setting Options for Test Parameters

Center distance for single flank test can be set in line with as-installed position in the transmission
Variable test force setting in double-flank test for maximum sensitivity thanks to linear drive technology
Workpiece speed up to 2,000 rpm for fast test times and optimal excitation of the structure-borne noise and angular acceleration sensors
Counter support with variable clamping force setting, particularly for slim shafts

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

User-Friendly Operating Concept

Safe basic operation through hardware switches, e.g., workpiece clamping/releasing, manual traversing of test slides, etc.
Innovative touchscreen technology with intuitive graphical user interface
Clear operator guidance thanks to process-oriented menu structure
Menu navigation is ultra-easy and requires minimal training thanks to process-based HMI structure
Production dashboard provides an at-a-glance display of the most important test results for a selectable time window

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

Maximum Precision and Accuracy

High-precision angular measurement systems and 12.4 GHz scan rate for maximum-accuracy measured data acquisition in the single flank test
Highly sensitive acceleration sensors and 50 kHz scan rate for high-resolution structure-borne noise and angular acceleration measurement
High-precision Heidenhain linear scales for maximum-accuracy measured data acquisition in the double-flank test
High-precision linear guides to ensure high mechanical accuracy and reproducibility

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

Production dashboard – all process data clearly in focus

Production dashboard provides a quick overview of production figures
Customize dashboard chart colors from a palette of fifteen free selectable colors
Good/reject statistics per component type
Good/reject statistics per production period

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

Flexible Automation Concept for Minimal Non-Productive Time

Production cell can be equipped with all machine models in the Speed Viper series – from the Speed Viper 80² (dual spindle) to the Speed Viper 300
Direct workpiece spindle loading by integrated swivel loader
Minimal auxiliary times
Optimally coordinated interfaces and processes
Alternatively, partial or full automation with signal interface in accordance with the VDMA standard 34180

R 300

HÖFLER Cylindrical Gear Roll Testing Machine

Compact, flexible and highly accurate testing technology

By clicking on the image you will leave our website and be redirected to www.youtube.com.

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

Modular Machine Design

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

Fast Changeover

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

Flexible Setting Options for Test Parameters

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

User-Friendly Operating Concept

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

Maximum Precision and Accuracy

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

Production dashboard – all process data clearly in focus

Highlight

HÖFLER Cylindrical Gear Roll Testing Machine R 300

Flexible Automation Concept for Minimal Non-Productive Time

Competent Service

Service Feature

KLINGELNBERG Service – Quality and competence that impress

Industry Solutions

Know-how for your success

No matter what your Branch or Industry, we offer you the ideal complete Solution

We will be glad to help you

Contact

Contact KLINGELNBERG's Sales and Service subsidiaries throughout the world