Highlight
Oerlikon Bevel Gear Cutting Machine C 27
Compact machine with small floor space
- Suitable for dry and wet processing
- Integrated deburring
- Complete integration in the closed loop system
- Optimized for face hobbing and face milling
C 27
Oerlikon Bevel Gear Cutting Machine
Highly efficient, environmentally friendly dry-cutting
The application range of the C 27 bevel gear cutting machine is ideal for the gearbox sizes found in passenger car and small truck applications. This machine is equipped with direct drives and is designed for cutting workpiece diameters up to 270 mm. The C 27 makes it possible to achieve cutting speeds that allow highly cost-effective dry-cutting even for a large number of cutter head starts and small numbers of teeth.
- 6-axis CNC machine for highly efficient bevel gear cutting
- Well-tried axis concept for compact high-performance carbide tool design
- Short retooling times thanks to ergonomic machine design
- Unrivaled gearing and surface quality
- Energy efficient (e2)
| Range of Application | continuous indexing | single indexing |
|---|---|---|
| Workpiece Data | ||
| Workpiece diameter (max.) | Ø 270 mm | Ø 270 mm |
| Normal module range (min. – max.) | 1.5 – 6.5 mm | 1.5 – 6.5 mm |
| Tooth width (max.) | 58 mm | 58 mm |
| Smallest/largest spiral angle | 0°/60° | 0°/60° |
| Smallest/largest number of teeth | 6/180 | 6/180 |
| Smallest/largest gear ratio | 1:1/1:10 | 1:1/1:10 |
| Tool Data | ||
| Cutter head diameter | 39 – 105 mm | 3.25“ – 7.5“ |
| Cutter Head Spindle (A axis) | ||
| Seating diameter: Gleason outer cone, No. 14; 1:24 | Ø 58.227 mm | Ø 58.227 mm |
| Cutter head spindle speed (max.) | 1,500 rpm | 1,500 rpm |
| Workpiece Spindle (B axis) | ||
| Seating diameter: Oerlikon outer cone 1:4 | Ø 140.11 mm | Ø 140.11 mm |
| Seating diameter: Oerlikon inner cone No. 39; 1:19,764 | Ø 99.258 mm | Ø 99.258 mm |
| Workpiece spindle opening | Ø 90 mm | Ø 90 mm |
| Workpiece spindle speed (max.) | 1,500 rpm | 1,500 rpm |
| General Machine Data | ||
| Total connected load without filter system | 40 kVA | 40 kVA |
| Net weight approx. | 11,200 kg | 11,200 kg |
| Machine dimensions (L x W x H) approx. | 3,670 x 2,025 x 2,050 mm | 3,670 x 2,025 x 2,050 mm |
The above-mentioned maximum values were determined for industry-typical gear units.
If necessary it has to be examined whether maximum values can be combined.
Subject to changes.
The machine dimensions of the standard version are for orientation only. The final machine dimension / final space requirement depends on the individual configuration of the machine.show more
show less
